Stained, fully milled Wooden folding doors

Solid folding doors of classic design. Instead of glass panes, we insert milled wooden filung. The doors are assembled from wooden components. The wood is hand-painted […]

Solid folding doors of classic design. Instead of glass panes, we insert milled wooden filung. The doors are assembled from wooden components. The wood is hand-painted and finished with satin varnish. This technique emphasises the natural grain and creates a colour match between the door and its surroundings. Our folding doors have been created by a highly experienced designer. Each time produced on order. They compete with imported, mass-produced products made of cheap plastic. Alongside the standard doors, we also manufacture folding doors tailored to the customer’s requirements.
• doors made of knagless solid pine wood,
• extremely solid, does not electrify unlike its cheaper plastic (PVC) substitutes,
• since 1990 our company has been producing folding doors (it is more than 30 years on the mar-ket),
• What distinguishes us from other companies is high quality materials and modern technology,
• we provide professional assistance via telephone, e-mail, in our workshop and on our website,
• the product purchased is under warranty for 5 years,
• our folding doors have been created by a highly experienced designer

The package includes:

1. Door wing – 1 pc
2. Upper rail – 1 pc
3. Doorstep – 1 pc
4. Side channel – 1pc
5. Handling – 2 pcs
6. Lower sliding pad – 1 pc
7. Screw for pad – 1 pc
8. Lower sliding pin- 6 pc *)
9. Short lower fittings – 2 pcs
10. Long lower fittings – 2 pcs *)
11. Screws for fittings – 16 pcs *)
*) quantity in the case of a standard 80 sm doors.

Available colours

Upon request, colour samples can be sent by post. The sample is made the same way as the door – from pine wood, stained with stain and varnished twice. It should also be borne in mind that the colour saturation depends on the grain of the wood and can vary in different areas on the door.
The threshold is made of beech wood. Its natural colour will not be changed.


Upper sliding
• upper guide rail – plastic guide rail, reinforced with an aluminium profile and wooden decorative channel on the outside,
• polyamide door hangers – a simple, robust, reliable solution,
• metal fittings to reinforce door sections.

Magnetic closure

Lower sliding
• Hard beechwood threshold,
• polyamide insert to reinforce and stabilise the first trim,
• Metal fittings reinforcing the door sections from below, additionaly metal pins to stabilise the door.
NOTE: It is possible to install our folding doors without lower sliding.

Assembly
• The pre-assembly measurement depends on the chosen assembly methhod : measurement_instructions_no.1. Please measure the width W and height H of the opening in which the door is to be installed.
• The assembly of folding doors can be done single-handedly. The height can be easily adjusted using simple tools: cutting_instruction. Upon customer request, we will prepare doors to the specified dimensions.
• How to assemble a folding door depends on a place where the door is installed. The door can be installed in an existing frame (in two ways) or directly in a machined opening without a frame: measurement_instructions_no.1.
• We recommend a different installation method in the existing door frame: measurement_instructions_no.2

gdpr-image
This website uses cookies to improve your experience. By using this website you agree to our Data Protection Policy.